Solution Description
Company Profile
ZHangZhoug INJ transmission techniques Co.,ltd situated in HangZhou, ZHangZhoug province,was founded in 2003. We are a specialist provider of domestic and imported transmission belts. We have great experience and technologies in stoneceramicwoodtextilestobaccologisticsfirecrackersmedicineglasssteelautomotiveelectronicsbeveragesspicespaperprintingcable. Welcome all CZPT ers to make contact with us any time to examine and negotiate.
Raw CZPT
Belt: CZPT -top quality neoprene (CR)as the main raw components(imported from Japan)
Skeleton components: CZPT Fiber(imported from Janpan)
Tooth surface area: Nylon 66 high
Product Features
*1: CZPT -efficiency element and severe tensile strength
*2: Terribly resistance on chilly & warmth (-40ºC-120ºC), oil and ozone
*3: Outstanding ageing-resistance and abrasion-resistance
*4: Slip-cost-free transmission and minimal noise
Item Description
Sort | Source Attribute |
MXL XXL XL L H XH XXHT 2.five T5 T10 T20 AT5 AT10 AT twenty HTD:2M 3M 5M 8M 14M 20M STS:S2M S3M S4.5M S5M S8M S14M RPP:RP2M RP3M RP5M RP8M RP14M |
1. Company foremost items with much more than 4000 moulds. 2. Reducing or offer sleeve according to CZPT er’s need. three. Anti-static, oil, warmth-resistant,reduced temperature resistance ect. |
House of Timing Belt
Check Item | Examination End result |
Tension power (≥KN/25.4mm) | .59-ten.8 (in accordance to types) |
Elongation (≤ % ) | 4. (all sorts) |
Loading (KN/twenty five.4mm) | .49-8.64 (according to kinds) |
Trapezoidal Tooth Profile
Curvilinear Tooth Profile
Curvilinear Tooth Profile
Gear code | Sort | Pitch(mm) | Tooth peak(mm) | Belt thickness(mm) |
HTD | 3M | 3 | one.22 | two.forty |
5M | 5 | 2.06 | three.80 | |
8M | 8 | three.36 | 6.00 | |
14M | 14 | 6.02 | ten.00 | |
20M | 20 | 8.forty | 13.twenty | |
STPD/STS | S2M | two | .76 | one.36 |
S3M | three | 1.fourteen | one.ninety | |
S4.5M | 4.5 | 1.71 | 2.eighty one | |
S5M | 5 | 1.ninety one | 3.forty | |
S8M | eight | 3.05 | 5.30 | |
S14M | 14 | five.30 | 10.twenty | |
RPP/HPPD | P2M | 2 | .76 | one.36 |
P3M | three | 1.fifteen | one.ninety | |
P5M | 5 | 1.95 | three.50 | |
P8M | eight | three.twenty | 5.fifty | |
P14M | fourteen | 6.00 | 10. |
T type CZPT Timing Belt
Sort | Pitch(mm) | Tooth top(mm) | Belt thickness(mm) | Angle ° |
MXL | 2.032 | .51 | 1.fourteen | forty |
XXL | 3.one hundred seventy five | .seventy six | one.52 | 50 |
XL | five.080 | one.27 | two.thirty | fifty |
L | 9.525 | one.ninety one | 3.sixty | forty |
H | twelve.70 | two.29 | 4.30 | 40 |
XH | 22.225 | 6.35 | 11.twenty | 40 |
XXH | 31.750 | nine.53 | 15.70 | forty |
T2.5 | 2.five | .seven | one.thirty | forty |
T5 | 5 | 1.two | 2.twenty | forty |
T10 | 10 | 2.fifty | 4.fifty | 40 |
T20 | twenty | 5.00 | eight.00 | 40 |
AT5 | 5 | 1.20 | two.70 | fifty |
AT10 | ten | two.50 | 5.00 | 50 |
AT20 | 20 | 5.00 | eight.00 | fifty |
Customer Recognize
1. The value is subject matter to the company’s true quotation!
2. All goods are strictly inspected by CZPT business just before shipment to guarantee that they are transported without problems.
3. The pictures are all taken in variety, but there will be slight chromatic aberration because of to light-weight and display, etc. Remember to recognize.
4. Just before putting an buy or just before getting, please seek the advice of the product design, specifications, etc. so that we can affirm whether the product you need to have is in stock.
1. Could you offer you the sample for screening?
RE: If you need to have sample, pls get in touch with us quickly. about the sample cost, we can consult it.
two. How about the shipping day?
RE: The supply date is depended on your amount. Little get is about 5 days, big purchase 20 days.
3. Do you established the MOQ and give any price cut?
RE:We do not set the MOQ. But the much more you location, the far more price cut you will get.
In a dual pulley system, this ratio is equivalent to the reference diameter of the output pulley becoming better than the reference diameter of the input pulley. It really is relatively straightforward as extended as you estimate the gear ratios for a more complicated pulley program phase by action. For multiple pulleys, the ratios of the a variety of parts of the system should be calculated to figure out the all round ratio. In the photograph previously mentioned, the reference diameter of the decrease push wheel is 20mm, the radius of the higher wheel is 40mm, and the ratio is 2:1. 2 spins on the lower wheel and 1 spin on the higher wheel. The equipment ratio also tells us one thing about the torque of the system since the ratio of output torque to input torque is equal to the equipment ratio. Therefore, the torque utilized to the higher wheel is twice as quick, but the pace is halved.