china Cheap INJ- Timing belts  rubber indutrial drive belts TP belt manufacturers

Solution Description

Business Profile

ZHangZhoug INJ transmission programs Co.,ltd located in HangZhou, ZHangZhoug province,was founded in 2003. We are a expert provider of domestic and imported transmission belts. We have very good knowledge and technologies in stoneceramicwoodtextilestobaccologisticsfirecrackersmedicineglasssteelautomotiveelectronicsbeveragesspicespaperprintingcable. Welcome all CZPT ers to contact us any time to examine and negotiate.

Belt: CZPT -top quality neoprene (CR)as the primary uncooked materials(imported from Japan)
Skeleton components: CZPT Fiber(imported from Janpan)
Tooth area: Nylon 66 high

Item Functions
*1: CZPT -performance factor and excessive tensile toughness
*2: Extraordinarily resistance on cold & warmth (-40ºC-120ºC), oil and ozone
*3: Superb aging-resistance and abrasion-resistance
*4: Slip-totally free transmission and minimal noise

Item Description

Type Supply Characteristic
T5 T10 T20 AT5 AT10 AT twenty
HTD:2M 3M 5M 8M 14M 20M
STS:S2M S3M S4.5M S5M S8M S14M
1. Firm top products with more than 4000 moulds.
two. Slicing or offer sleeve in accordance to CZPT er’s need.
three. Anti-static, oil, heat-resistant,lower temperature resistance ect.

House of Timing Belt

Test Product Take a look at Consequence
Pressure toughness (≥KN/twenty five.4mm) .59-10.8 (in accordance to varieties)
Elongation (≤ % ) four. (all types)
Loading (KN/twenty five.4mm) .forty nine-8.64 (in accordance to kinds)

Trapezoidal Tooth Profile

Curvilinear Tooth Profile 

Curvilinear Tooth Profile 

Gear code Sort Pitch(mm) Tooth peak(mm) Belt thickness(mm)
HTD 3M 3 one.22 2.40
5M 5 two.06 3.eighty
8M eight three.36 6.00
14M 14 six.02 ten.00
20M 20 eight.40 13.twenty
STPD/STS S2M two .seventy six one.36
S3M 3 1.fourteen 1.90
S4.5M four.five one.71 two.81
S5M 5 1.ninety one 3.40
S8M eight 3.05 five.thirty
S14M 14 five.30 ten.twenty
RPP/HPPD P2M 2 .76 1.36
P3M three 1.fifteen one.ninety
P5M five one.ninety five three.50
P8M eight 3.20 5.fifty
P14M fourteen six.00 10.

T kind CZPT Timing Belt

Type Pitch(mm) Tooth top(mm) Belt thickness(mm) Angle °
MXL two.032 .fifty one 1.fourteen 40
XXL hundred seventy five .76 1.52 50
XL five.080 one.27 two.thirty 50
L 9.525 1.91 3.sixty forty
H twelve.70 two.29 four.thirty 40
XH 22.225 6.35 eleven.20 40
XXH 31.750 nine.fifty three fifteen.70 forty
T2.5 two.5 .seven one.thirty 40
T5 five one.2 two.twenty 40
T10 ten two.fifty 4.fifty forty
T20 twenty five.00 eight.00 40
AT5 five one.20 2.70 fifty
AT10 ten two.50 five.00 fifty
AT20 twenty five.00 8.00 fifty

Consumer Recognize
1. The value is topic to the firm’s real quotation!
two. All goods are strictly inspected by CZPT organization before shipment to guarantee that they are shipped with out issues.
3. The photos are all taken in variety, but there will be slight chromatic aberration due to mild and exhibit, and so forth. Please realize.
four. Ahead of positioning an purchase or just before getting, remember to seek the advice of the solution model, requirements, etc. so that we can affirm regardless of whether the solution you want is in inventory.


1. Could you offer you the sample for testing?
RE: If you need to have sample, pls make contact with us soon. about the sample charge, we can seek advice from it.
2. How about the shipping and delivery day?
RE: The delivery date is depended on your amount. Tiny get is about 5 days, large order 20 times.
three. Do you established the MOQ and give any low cost?
RE:We do not established the MOQ.  But the far more you spot, the much more discount you will get.

In a twin pulley system, this ratio is equivalent to the reference diameter of the output pulley getting better than the reference diameter of the input pulley. It’s reasonably simple as extended as you estimate the equipment ratios for a far more sophisticated pulley method stage by stage. For several pulleys, the ratios of the numerous parts of the system need to be calculated to decide the total ratio. In the image over, the reference diameter of the decrease drive wheel is 20mm, the radius of the higher wheel is 40mm, and the ratio is 2:1. 2 spins on the reduce wheel and 1 spin on the higher wheel. The gear ratio also tells us anything about the torque of the system simply because the ratio of output torque to enter torque is equal to the gear ratio. For that reason, the torque applied to the upper wheel is twice as quick, but the speed is halved.
china Cheap INJ- Timing belts  rubber indutrial drive belts TP belt manufacturers

Timing Belt Pulley

As one of the leading timing belt pulley manufacturers, suppliers, and exporters of mechanical products, We offer timing belt pulley and many other products.

Please contact us for details.

Manufacturer supplier exporter of the timing belt pulley.

Recent Posts