Solution Description
OUR Associates
Item: CZPT T10 Collection Synchronization CZPT ized Enamel CZPT Timing Belt for CZPT ctronic Accessories and Agricultural CZPT CZPT
Complex DATAS
| Rubber timing belts | |||
| T type CZPT timing belt | |||
| Type | Pitch | Tooth height | Belt thickness |
| (mm) | (mm) | (mm) | |
| MXL | two.032 | .fifty one | 1.14 |
| XL | 5.08 | one.27 | 2.3 |
| L | 9.525 | 1.ninety one | 3.6 |
| H | 12.7 | 2.29 | 4.3 |
| XH | 22.225 | 6.35 | 11.2 |
| XH | 31.seventy five | 9.fifty three | fifteen.seven |
| T2.5 | two.five | .7 | 1.three |
| T5 | 5 | 1.2 | 2.2 |
| T10 | ten | 2.five | 4.five |
| T20 | 20 | 5 | 8 |
| AT5 | five | 1.two | two.seven |
| AT10 | 10 | two.five | 5 |
| AT20 | 20 | 5 | 8 |
| Arc tooth CZPT timing belt | ||||
| Series | Type | Pitch | Tooth height | Belt thickness |
| (mm) | (mm) | (mm) | ||
| HTD | 2M | two | .seventy five | one.36 |
| 3M | three | one.17 | two.four | |
| 5M | 5 | two.06 | 3.8 | |
| 8M | eight | 3.36 | 6 | |
| 14M | 14 | 6.02 | 10 | |
| 20M | 20 | eight.4 | thirteen.2 | |
| STPD/STS | S2M | two | .seventy six | one.36 |
| S3M | 3 | one.14 | two.two | |
| S4.5M | 4.five | 1.17 | 2.eighty one | |
| S5M | five | one.ninety one | three.four | |
| S8M | eight | 3.05 | five.3 | |
| S14M | fourteen | 5.three | 10.two | |
| RPP/HPPD | P2M | two | .seventy six | 1.36 |
| P3M | three | one.fifteen | 1.9 | |
| P5M | five | one.95 | three.five | |
| P8M | eight | three.2 | five.five | |
| P14M | fourteen | 6 | 10 | |
Purposes
PAYMENT Techniques
T/T, CZPT ern CZPT , Moneygram are present conditions.
WHY Pick US
Good quality ASSURANCE
Promise that the commodity hereof complies in all respects with the top quality and specification stipulated in the deal.
Delivery Ensure
Ship the products inside of the cargo time from the port of shipment to the vacation spot in the contract.
Manufacturing facility Cost
Charges refer to the cost of uncooked resources straight from manufacturing facility.
Staff OF Specialists
Offer skilled CZPT er support and technological help like belts selection, calculation, software and soon after-sale service.
FABRICATION WORKSHOP
Provide belts cutting, jointing, as nicely as belt perforations, belt sealed, belt coated with rubber and sponge, belt guides,and so forth.
Provider Network
Established up office, branches in HangZhou, HangZhou, HangZhou, CZPT kong, etc, provider spots for processing industrial belts in HangZhou,HangZhou,Yongbo etc.
ABOUT US
Overview
| Top quality Assurance Technique | Tiger Standard |
| Telephone | 86(571)68883000,(571)88811642 |
| Fax | 86(571)83112333 |
| Trademark | TGRBELT |
| Controlling Director | Mr. Li |
Company Introduction
Our Items
Creation and Processing
Take a look at Report
OTHER Associated Products
-device tape
-spindle tape
-tangential generate belt
-OE rotor spinning belt
-twisting flat belt
-folder-gluer belt
-extruded round belt polycord
-conveyor processing belt
In a dual pulley program, this ratio is equal to the reference diameter of the output pulley currently being increased than the reference diameter of the enter pulley. It truly is pretty uncomplicated as long as you determine the equipment ratios for a much more complicated pulley program stage by stage. For a number of pulleys, the ratios of the different components of the mechanism have to be calculated to determine the general ratio. In the image earlier mentioned, the reference diameter of the reduce travel wheel is 20mm, the radius of the upper wheel is 40mm, and the ratio is 2:1. 2 spins on the reduced wheel and 1 spin on the higher wheel. The equipment ratio also tells us something about the torque of the method due to the fact the ratio of output torque to enter torque is equal to the equipment ratio. As a result, the torque applied to the upper wheel is 2 times as quick, but the speed is halved.