Item Description
Double-sided Timing Belt
The belt generates with Japan imported substantial quality artificial neoprene, and matches into several distinct utilizes of rubber components Skeleton materials imported from Japan for substantial top quality glass fiber wire Tooth surface area with nylon sixty six higher stretch as protection.
The product’s pitch and tooth profile is synonymous with one tooth synchronous belt
The merchandise are primarily employed for double push, synchronous and double efficiency attributes. In the needs with a band transmission and in reverse instructions, Set up position demand specific compact, or in the primary drive and auxiliary transmission linkage and other transmission demanding field, displays its excellence Products to construction and no slip meshing transmission attributes such as minimal sounds by the mechanical textile precision devices petroleum chemical conversation cable market recognition and understanding to a wide assortment of apps.
Kind:
D-XL, D-L, D-H, D-XH, D-XXH, D-T2.5, D-T5, D-T10, D-T20, D-AT10, D-3M, D-5M, D-8M, D-14M, DS-5M, DS-8M, DS-14M
Supply Attribute:
- For design can reference solitary-sided timing belt.
- Slicing or supply sleeve according to CZPT er’s necessity.
- The least order quantity is one particular sleeve.
- Belt size need to be a lot more than 450mm.
The double-sided pitch synchronous belt and tooth profile are equal to a single tooth and tooth belt pitch.
Double enamel with tooth by the synchronous belt arrangement requirements can be divided into two kinds
DA-duplex synchronous belt tooth, a tooth with its two symmetrical arrangement, see Determine (a)
DB-duplex synchronous belt gear, with its two areas with staggered enamel, see Determine (b)
Whole Height of Double Sided Timing Belt
| Kind | W | T | Measurement | Pitch Duration(mm) | Teeth No. |
| D-XL | .508 | three.05 | 196XL~1970XL | 497.eighty four~5003.8 | ninety eight~985 |
| D-L | .762 | four.58 | 203L ~1988L | 514.35~5048.twenty five | fifty four~530 |
| D-H | 1.372 | 5.95 | 670H~ 2500H | 1701.8~6350 | 124~five hundred |
| D-XH | two.794 | 15.49 | 700XH~ 2275XH | 1778.00~5778.five | eighty~260 |
| D-XXH | 3.048 | 22.11 | 700XXH ~2625XXH | 1778.00~6667.5 | 56~210 |
| D-T2.five | .60 | two.00 | T2.5×500 ~T2.5×5000 | 500.00~5000.00 | two hundred~2000 |
| D-T5 | 1.00 | three.40 | T5x500~T5x7000 | five hundred.00~7000.00 | 100~1400 |
| D-T10 | two.00 | 7.00 | T10x500~T10x7050 | five hundred.00~7050.00 | fifty~705 |
| D-T20 | three.00 | 13.00 | T20x1700~T20x7000 | 1700.00~7000.00 | 85~350 |
| D-AT10 | 2.00 | seven.00 | AT10x500~AT10x7000 | 500.00~7000.00 | 50~seven hundred |
| HTD,DA-3M | .760 | three.ten | 501-3M~5571-3M | 501.00~5571.00 | 167~1670 |
| HTD,DA-5M | 1.143 | five.26 | 500-5M~7000-5M | 500.00~7000.00 | 50~1400 |
| HTD,DA-8M | 1.372 | eight.17 | 512-8M~6880-8M | 512~6880 | 64~860 |
| HTD,DA-14M | two.eighty | 14.84 | 1750-14M~6860-14M | 1750~6860 | 125~490 |
| HTD,DA-S8M | 1.372 | 7.forty eight | S8M-512~S8M-6880 | 512~6880 | 64~860 |
Mounted pulley: The shaft is fixed pulley. It can rotate, but can’t go freely in any direction.